Sample 8000 Series
Model
Sample 1
Specification
| Operating Mass (Canopy/Cab) | kg | 3,770 |
| Bucket Capacity | m3 | 0.11 |
| Bucket Width (with side cutter) | mm | 560 (600) |
| Arm Length | m | 1.37 |
| Bucket Digging Force | kN | 27.8 |
| Arm Crowding Force | kN | 22.5 |
| Engine | YANMAR 3TNV82A-B Direct injection,water-cooled, 4 cycle, 3 cylinders, diesel engine |
|
| Power Output | kW(hp)/min-1 | 18.1 (24.27)/ 2,400 |
| Maximum Torque | Nm/min-1 | 79.4/ 1,440 |
| Displacement | Liter | 1.331 |
| Fuel Tank | Liter | 42 |
| Hydraulic Oil Tank (System) | Liter | 20.4 (44.8) |
| Hydraulic Pumps | Two variable displacement pumps + One Gear Pump | |
| Maximum Flow | L/min | 2 x 38.4, 1 x 19.2 |
| Relief Valve Setting | MPa | 23 |
| Travel Motor | 2 x Axial piston type | |
| Travel Speed (High/ Low) | km/h | 4.4/ 2.5 |
| Swing Speed | min-1 | 8.4 |
| Shoe Width | mm | 300 |
| Ground Pressure (Canopy/Cab) | kPa | 32.0/ 33.5 |
Sample2
Specification
| Operating Mass (Canopy/Cab) | kg | 4840 |
| Bucket Capacity | m3 | 0.18 |
| Bucket Width (with side cutter) | mm | 560 (600) |
| Arm Length | m | 1.4 |
| Bucket Digging Force | kN | 35.2 |
| Arm Crowding Force | 28 | |
| Engine | YANMAR 3TNV82A-B Direct injection,water-cooled, 4 cycle, 4 cylinders, diesel engine |
|
| Power Output | kW(hp)/min-1 | 29.6 (39.7)/ 2,400 |
| Maximum Torque | Nm/min-1 | 132.9/ 1,440 |
| Displacement | Liter | 2.189 |
| Fuel Tank | Liter | 75 |
| Hydraulic Oil Tank (System) | Liter | 27.9 (57.7) |
| Hydraulic Pumps | Two variable displacement pumps + One Gear Pump |
|
| Maximum Flow | L/min | 2 x 49.9, 1 x 33.8 |
| Relief Valve Setting | MPa | 23 |
| Travel Motor | 2 x Axial piston type | |
| Travel Speed (High/ Low) | km/h | 3.7/ 2.1 |
| Swing Speed | min-1 | 8.8 |
| Shoe Width | mm | 400 |
| Ground Pressure (Canopy/Cab) | kPa | 27.4/ 28.1 |