Construction Machinery

HIDROMEK

Motor Grader

MODEL MG 330 MG 430 MG 530
Operating Mass kg 13,575 14,850 15,705
Blade (Length x Height x Thickness) mm 3,710 x 610 x 19 3,710 x 610 x 19 4,010 x 720 x 19
Max. Blade Lift Above Ground mm 460 470 610
Circle Turning Angle degree 360° 360° 360°
Max. Shoulder Reach (Left/ Right) mm 1,890/ 1,900 1,970/ 2,000 2,085/ 2,045
Max. Bank Cutting Angle degree 90° 90° 90°
Cutting Angle degree 36° to 81° 33° to 81° 42° to 91°
Engine   MITSUBISHI 6D16-TEI MITSUBISHI 6D16-T MITSUBISHI 6D24-TUN
    Direct injection, water cooled, 4 cycle, 6 cylinders, diesel with turbocharger Direct injection, water cooled, 4 cycle, 6 cylinders, diesel with turbocharger Direct injection, water cooled, 4 cycle, 6 cylinders, diesel with turbocharger
Power Output kW(hp)/min-1 101(135)/ 2,200 116(155)/ 2,000 138(185)/ 2,000
Maximum Torque Nm 608 686 858
Displacement Liter 7.545 7.545 11,945
Hydraulic Pumps   Tandem Gear Pump Tandem Gear Pump Tandem Gear Pump
Flow Capacity L/min 60+60+60 /2,200 rpm 54+54+54 /2,000 rpm 54+54+54 /2,000 rpm
Relief Valve Setting MPa 17.2 17.2 17.2
Transmission   Powershift with 6 speeds for both forward and reverse Powershift with 6 speeds for both forward and reverse Powershift with 6 speeds for both forward and reverse
Tires   13.00-24-8 PR (G-2) 13.00-24-10 PR (G-2)    14.00-24-16 PR (G-2)
Dimension (Length x Height x Width) mm 7,820 x 2,800 x 2,380 8,475 x 3,405 x 2,420 8,745 x 3,650 x 2,440
Ground Clearance mm 380 360 460

 

hydormek-04  hydormek-05  hydormek-06 

 

MODEL MG 330 MG 430 MG 530
Operating Mass kg 13,575 14,850 15,705
Blade (Length x Height x Thickness) mm 3,710 x 610 x 19 3,710 x 610 x 19 4,010 x 720 x 19
Max. Blade Lift Above Ground mm 460 470 640
Circle Turning Angle degree 360° 360° 360°
Max. Shoulder Reach (Left/ Right) mm 1,890/ 1,900 1,970/ 2,000 2,085/ 2,045
Max. Bank Cutting Angle degree 90° 90° 90°
Cutting Angle degree 36° to 81° 33° to 81° 42° to 91°
Engine  

MITSUBISHI 6D16-TEI
Direct injection, water cooled,
4 cycle, 6 cylinders, diesel 4 cycle,
with turbocharger

MITSUBISHI 6D16-T
Direct injection, water cooled,
4 cycle, 6 cylinders, diesel
with turbocharger, intercooler

MITSUBISHI 6D24-T
Direct injection, water cooled,
4 cycle, 6 cylinders, diesel
with turbocharger

Power Output kW(hp)/min-1 101(135)/ 2,200 116(155)/ 2,000 138(185)/ 2,000
Maximum Torque Nm 608 686 858
Displacement Liter 7.545 7.545 11,945
Hydraulic Pumps   Tandem Gear Pump Tandem Gear Pump Tandem Gear Pump
Flow Capacity L/min 60+60+60 / 2,200 rpm 54+54+54 /2,000 rpm 54+54+54 /2,000 rpm
Relief Valve Setting MPa 17.2 17.2 17.2
Transmission  

Powershift with 6 speeds
for both forward and reverse

Powershift with 6 speeds
for both forward and reverse

Powershift with 6 speeds
for both forward and reverse

Tire   13.00-24-8 PR (G-2) 13.00-24-10 PR (G-2) 14.00-24-12 PR (G-2)
imension (Length x Height x Width) mm 7,820 x 2,800 x 2,380 8,475 x 3070 x 2,420 8,745 x 3,650 x 2,440
Ground Clearance mm 380 360 380

 

hydormek-07  hydormek-08 

ISO Logo

iso-logo

 

Join Us on Facebook

Yangon Branch

Our Address:
No.1 (A), Bayintnaung Road, Aye Yeik Mon Housing, Ward-4, Hlaing Township, Yangon, Myanmar.
Telephone:
Tel: (+95-1) 681 660~662, 683 513, 682 189, 682 345
Fax:
(+95-1) - 680 722
Email:
This email address is being protected from spambots. You need JavaScript enabled to view it.

Mandalay Branch

Our Address:
No. Nga-7/8, Yangon-Mandalay Road, Between Kywe Sei Kan Street 1st & 2nd, Pyigyitagon Township, Mandalay, Myanmar.
Telephone:
(+92-2) 703 30, 363 20, 235 43,599 59
Fax:
(+95-2) 703 30
Email:
This email address is being protected from spambots. You need JavaScript enabled to view it.

Naypyitaw Branch

Our Address:
No-171, Thiri Yadanar Shopping Complex, Nay Pyi Taw, Myanmar.
Telephone:
(+95-67) 421 759,421 729
Fax:
(+95-67) -421 259
Email:
This email address is being protected from spambots. You need JavaScript enabled to view it.